Upgrade your account to get rid of the ads.

(TPA) Vanilla Bean Ice Cream


By: The Flavor Apprentice (TPA) - Buy Direct
Buy From: bcv ecigexpress gremlin wizard

Used in 11842 recipes at an average of 3.058%.

Loading...

537 DIY E-Liquid Recipes found


Sweet berry iced cream, 1st edition, not tested yet, DO NOT MIX, this is a draft for Adam.

1

This was my go to recipe before I discovered I could no longer vape cinnamon. For those that can indulge (let me say how jealous I am) this is one of those recipes that I vaped until every last drop in the bottle was gone. My husband still vapes this in a MTL tank and I seriously think he does it to make me jealous, but enough about that. It was a sweet, fulfilling flavor with a great balance of cinnamon, cream, and dark undertones. If you try it make sure to let me know so I can be jealous of you too.

1

Blood Orange Creamy Vanilla Ice Cream

Add cooling if you want. I hate it.

FW Blood Orange is really good buut I find it super harsh on my throat parts. So I used it at 1% and filled up the orange flavor with Juicy Orange. Added a touch of Dragonfruit to make it even juicier.

OOO Whipped Cream for body and a light vanilla note. TPA Vanilla Bean Ice Cream because its tried and true.

I know: There are many pistachio ice cream recipes out there. This is just the way I like it.

I was disappointed with most I've tried and decided to make my own version. No big notes here on the flavors used, because it's mostly self explanatory, I think. Just 3 little things I want to talk about:

Used TPA Sweetener instead of, for example, CAP Super Sweet, because I don't want too much sweetness and the ethyl maltol portion of the TPA Sweetener is doing wonders here. I also love FA's Honey in most creamy profiles, and it fits really well here too. I think the WS-23 is necessary, because, you know, it's an ice cream after all.

Hope you enjoy and have a nice vape!

1

The mix is what it is. Nothing fancy and no fuss. Best to let it sit over night before vaping.

Nice and thick, creamy vanilla malt marshmallow milkshake.

TPA VBIC + FA Vanilla Ice Cream provides the ice cream base. TPA VBIC works fine on its own @ 3%, but FA Vanilla Ice Cream complements it nicely. This combination also allows the TPA VBIC to be used at a lower concentration, which will help to greatly reduce or even eliminate the "peppery" flavor that some people get.

TPA Malted Milk + FW Hazelnut is the malt. These two flavors work amazingly well together as a malt base. TPA Malted Milk is extremely "potent" to me – using it at anything more than 1.25-1.5% completely overpowers everything else in a mix, while I see many recipes using it much higher. So you might need to increase the TPA Malted Milk from the 1% I am using here.

CAP Whipped Marshmallow + TPA Marshmallow obviously gives the marshmallow. I chose CAP Whipped Marshmallow as the main ingredient here, since its light and airy mouthfeel is a great way to help keep things from being bogged down. I tried TPA Toasted Marshmallow, which actually worked out pretty well, but I felt the recipe was starting to get a bit too "busy". If you would like to try it anyways, then go with 1.5% TPA Toasted Marshmallow and 1% CAP Whipped Marshmallow.

INW Shisha Vanilla boosts the vanilla flavor up a tiny bit. I didn't go very high here, because it would overpower the delicate marshmallows.

TPA Whipped Cream is there because all milkshakes need whipped cream.

CAP Vanilla Custard at the small amount of 0.5% doesn't alter the flavor much at all, but it helps tie everything together. I started out at 1%, but it added too much "butteryness", and began to encroach on the lighter flavors, like the whipped marshmallow and whipped cream.

It's definitely vapeable as a S&V, but definitely needs at least a week to meld.

This also works great as a base for other milkshake recipes. Depending on what you want to add, consider omitting the malt (the combination of TPA Malted Milk and FW Hazelnut). For example, when adding some caramel, cake / cookie, or especially some chocolate, keeping the malt might definitely be a great option. But if you want to add strawberry, banana, or other fruit, you probably would want to leave it out. One exception is when adding a cereal (like FW Fruity Flakes, or any of the dozens of other cereal flavorings available), where I'd recommend dropping the TPA Malted Milk but leaving in the FW Hazelnut. In a cereal recipe, FW hazelnut at low concentrations, as here, does a great job transforming the milk and cream flavorings into the milk left over after eating a bowl of cereal.

Note: I vape almost exclusively on RDA's at fairly high wattages (100-120 watts on average, and rarely anything below 80 watts), so my recipes tend to have less amounts of flavoring than average. Depending on your hardware and preferences, you may need to increase everything slightly. Using 1.25x - 1.5x what is listed here will put the total flavor concentration at 11.25–13.5%, which is more in line with what seems to be typical.

A super simple, super nice custard.

Light, smooth yet full of flavour

Smooth, creamy, straight up chocolate milk.

--5 drops (FA) MTS Vape Wizard--

NOT a very good shake n vape as most chocolate based recipes need at least 3 days to sweeten up and meld a bit so trust that it will get better!!

Note I had to substitute VBIC with TPA Vanilla Bean Gelato and it came out fantastic. I know some folks do not care for VBIC.

New to mixing, and this is my first clone... and yes, this was a total accident. If you have ever vaped this juice before, it has a distinct taste you just don’t forget. I was messing around with LB Rainbow Sherbet and was just trying to boost it with different fruits. I got a good balance going so I decided to throw in my favorite ice cream and gave it a go. After a few tweaks to the original recipe, I got a vape from the past and knew right away what I was tasting. Unicorn Puke... mmmmmm

Simple root beer for the caliburn. Adjust coolant and sweetener as needed

Flavor Notes